4-cassette LANGSTROTH honey extractor, Ø720mm, electric drive, semi-automatic, CLASSIC

Description

Honey extractor, 4-cassette, 720mm in diameter. Honey extractor made of acid-resistant stainless steel.

The drum is made of acid-proof stainless steel 0H18N9, properly reinforced and stiffened. Drum side and bottom made of 0.6mm thick sheet metal. Honey extractor has one 6/4 “stainless steel valve.

Basket made of stainless, acid-resistant rods, equipped with cassettes, the construction of which allows the frames to be protected against breaking the patches. The cassettes are connected with special guides, which preclude clamping the cassettes and springs, which allow you to return to the starting position. The basket is additionally mounted in two casters, top and bottom.

The safety lock mounted on the lid of the honey extractor stops the honey extractor operation when the lid is opened during centrifugation.

Transparent cover made of metaplex giving the opportunity to observe the spinning process without opening and risking contact with the rotating basket.

Semi-automatic control, honey extractor with this controller has the ability to work in manual (2 programs) and automatic mode (1 program). In manual mode, you can set the direction and speed (using the knob).

The automatic program is set at the factory. The automatic mode is activated by simultaneously pressing two side directional buttons.

As standard, we add special pads to the honey extractors to increase the comfort and safety of bee-keeping. Thanks to them, the vibrations of the honey extractors during honey spin are minimized.

The pads are made of PVC (SOFT) material. Very often spinning frames of different weights due to the different amounts of honey they contain. By using LYSON pads you ensure the highest quality of device optimization.