Categories


Wax melter with water seal, big + gas stool free

SKU:W4076UW

WAX MELTER, STAINLESS STEEL, LARGE WITH BURNER

This device is intended for recovery wax of the frames of bee and drought using the steam bath. It consists of an external tank, where is the water and the basket located frame or drought. Accessory is stool gas, so that heating tank with water get some steam.

$2,297.00

In stock

Description

WAX MELTER, STAINLESS STEEL, LARGE WITH BURNER

This device is intended for recovery wax of the frames of bee and drought using the steam bath. It consists of an external tank, where is the water and the basket located frame or drought. Accessory is stool gas, so that heating tank with water get some steam.


Machine’s parameter :

– Material : stainless steel

– Total height : 820 mm

Tank dimensions :

– Lenght – 580 mm

– Width – 420 mm

– Height – 610 mm

Frame basket dimensions :

– Lenght – 530 mm

– Width – 335 mm

– Height – 440 mm

– Diameter of the drain – 1 ”

Accessories :

– 8kW power gas stool

– Power supply – LPG

WARNING !

Gas cylinder connected to the burner via a pressure regulator for gas!

Capacity whole frame:

»16 – 20 frames Wielkopolskich, Ostrowski

»16 – 20 frames Warsaw Ordinary

»14 – 18 frames dilated Warsaw

»9 – 12 frames Dadant

Description of operation

1.Pour the tank with water to the level of the drain pipe.

2.Fill the basket of frames or drought.

3.The device replace the lid.

4.Burner placed under the device so that the flame heat up the entire bottom surface of the device.

5.Wait until the formation of steam and sail melted wax.

6.After melting the batch check the water level and the possible lack of make up.

7.Refill basket of frames or drought.

8.Steps 6 and 7 are repeated until the end of melting.

9.After the process is complete turn off the burner and gas cylinder.

10.Clean the basket and prepare it for the next use.

Additional information

Weight 29 kg
Dimensions 0.000000 × 0.000000 × 0.000000 cm